EA PSI5080-05A, DC-Lab Power supply, 160W, 80V, 5A, USB, Ethernet, analog, #05100401

Product no.: EA-05100401

Not in stock
This product is subject to possible delivery delays.

818.00
Price incl. VAT, plus delivery

EA-PSI5080-05 A DC-Laboratory power supply, 160 W, 80 V, 5 A, USB, Ethernet, analog

This product is order related with an standard delivery time of approx. 5 - 6 weeks. 

TECHNICAL DATA

  • Wide input voltage range 90…264 V with active PFC
  • High efficiency up to 95%
  • Output power ratings: 0…160 W 
  • Output voltages: 0…80 V 
  • Output currents: 0…5 A 
  • Flexible, power regulated output stage
  • Supervision (OVP, OCP, OPP)
  • Blue LCD display for all value and status
  • Memory for 9 different presets
  • Galvanically isolated, analog interface
  • Convection cooling 
  • Chassis top and bottom closed
  • 40 V models according to SELV (EN 60950)
  • USB and Ethernet port integrated
  • EMC according to EN 55022 Class B
  • SCPI command language supported, LabView VIs
  • Control software for Windows
  • Weight: 3 kg
  • Dimensions body only (W x H x D): 200 x 87 x 301 mm 

AC INPUT

The equipment uses an active Power Factor Correction (short: PFC), enabling worldwide use on a mains input from 90 VAC up to 264 VAC. Models with 1.5 kW will derate their output power to 1 kW below input voltages of 150 VAC.

AUTO-RANGING POWER STAGE

All models are equipped with a flexible auto-ranging output stage which provides a higher output voltage at lower output current, or a higher output current at lower output voltage, always limited to the max. nominal output power. The maximum power set value is adjustable with these models. Therefore, a wide range of applications can already be covered by the use of just one unit.

DC OUTPUT

DC output voltages between 0…40 V and 0…200 V, output currents between 0…2 A and 0…40 A and output power ratings between 0…160 W and 0…640 W are available.
Current, voltage and power can thus be adjusted continuously between 0% and 100%, no matter if manually or remotely controlled (analog or digital). The output terminals are located on the front side of the devices. There is furthermore an additional output on the rear side on a screw terminal. 

PROTECTIVE FEATURES

For protection of the equipment connected, it is possible to set an overvoltage protection threshold (OVP), as well as one for overcurrent (OCP) and overpower (OPP). 
As soon as one of these thresholds is reached for any reason, the DC output will be immediately shut off and a status signal will be generated on the display and via the interfaces. There is furthermore an overtemperature protection, which will shut off the DC output if the device overheats.

DISPLAY AND CONTROLS

Set values and actual values of output voltage and output current are clearly represented on the display. Set values of voltage, current and power, as well as the protection thresholds (OCP, OVP) can be adjusted using the rotary knobs.  To prevent unintentional operations, the knobs can be locked.

PRESETTING OF OUTPUT VALUES

To set output values without a direct reaction to the output condition, the set values are also shown on the display, positioned below the actual values. With this, the user can preset required values for voltage, current and power. It is done by using the rotary knobs. 

RECALL FEATURE

The device can store 9 different sets of preset values for voltage, current, power, OVP (adjustable overvoltage protection) and OCP (adjustable overcurrent protection). These can be recalled easily by the push of a button and help to avoid constant adjustment of the output values.

THREE-WAY INTERFACE

This interface, which is located on the rear side of all models of PSI 5000 series, offers three connectors: one analog and two digital ones. All three can be used to remotely monitor and control the device.
The analog connector offers inputs to set voltage, current and power in the range of 0…100% through control voltages of 0 V…10 V.
To monitor the output voltage and current, there are analog outputs with voltage ranges of 0 V…10 V. Also, several inputs and outputs are available for controlling and monitoring the device status.
The digital interfaces are USB and Ethernet. They can be used alternatively to completely control the device remotely or just record data. Remote control state is indicated in the display, while all buttons and knobs, except Local button, are locked. For USB there is no setup required and the network parameters for Ethernet connection can be comfortably configured on a website, that if offered on the device’s IP address.

OPTION

  • Safety adapter set (max. 32 A, 2 pcs. red/black), mounted on top of the DC output screw-clamp terminal, used to achieve a non-contact safety socket. For 4 mm Büschel plug.

#05100401

Additional product information

Handbook Download

Browse this category: PSI 5000 A Series